REASSEMBLY
Removal / installation · Vehicles built from Aug 2005
| 1. INSTALL LICENSE PLATE LIGHT ASSEMBLY |
except G. C. C. Countries:

Engage the 6 claws and install the license plate light.
for G. C. C. Countries:

Engage the 2 claws and install the license plate light.
| 2. INSTALL REAR BUMPER ENERGY ABSORBER LH (for G. C. C. Countries) |
Apply 2 new pieces of tape.

Install the rear bumper energy absorber with the clip.

| 3. INSTALL REAR BUMPER ENERGY ABSORBER RH (for G. C. C. Countries) |
- HINT:
- Use the same procedure as for the LH side.
