ON-VEHICLE INSPECTION
Inspection · Vehicles built from Nov 2005
| INSPECT GLOW PLUG ASSEMBLY |
Check the resistance.
Using an ohmmeter, measure the resistance between the glow plug terminal and ground.

- Standard resistance:
- 0.6 Ω at 20°C (68°F)
- NOTICE:
- Do not damage the glow plug pipes as this could cause an open circuit or shorten the life of the glow plugs.
- Prevent oil and fuel from spraying onto the glow plugs when cleaning.
- Wipe any oil off the terminal and the Bakelite washer with a dry cloth if they are stained with oil during the inspection.
- Do not apply more than 11 V to the glow plugs as this could cause an open circuit.
- Do not damage the glow plug pipes as this could cause an open circuit or shorten the life of the glow plugs.
