REMOVAL
Removal / installation · Vehicles built from Nov 2005
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE ENGINE COVER SUB-ASSEMBLY NO. 1 |
![]() ![]() |
Disengage the 4 pins and remove engine cover No. 1.
| 3. REMOVE GLOW PLUG NO.1 CONNECTOR |
Remove the 5 screw grommets.

Remove the nut and disconnect the glow terminal.

Remove the 4 nuts and glow plug connector No. 1.
| 4. REMOVE GLOW PLUG ASSEMBLY |
Using a 10 mm deep socket wrench, remove the 4 glow plugs.


