2005-2008 Yaris · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built from Nov 2005


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE AIR CLEANER CAP SUB-ASSEMBLY

  1. A127144
    Remove the grommet and 2 clamps and remove the air cleaner cap sub-assembly.


3. REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

4. REMOVE PURGE VSV ASSEMBLY

  1. A127147
    Remove the bolt and remove the purge VSV assembly.


5. REMOVE AIR CLEANER CASE SUB-ASSEMBLY

  1. A127148
    Disconnect the mass air flow meter connector.

  1. A127149
    Remove the 3 bolts and remove the air cleaner case sub-assembly.

  1. A127151
    Remove the O-ring from the throttle body assembly.


6. REMOVE INTAKE MASS AIR FLOW METER ASSEMBLY

  1. A127173
    Remove the 2 screws and the intake mass air flow meter assembly.

  1. A127174
    Remove the O-ring.

← ON-VEHICLE INSPECTION (from Nov 2005)INSTALLATION (from Nov 2005) →