2005-2008 Yaris · Service Manual ENGINE

INSTALLATION

Removal / installation · Vehicles built from Nov 2005


1. INSTALL INTAKE MASS AIR FLOW METER ASSEMBLY

A127174
  1. Install a new O-ring.

  1. A127173
    Install the mass air flow meter assembly and install the 2 screws.


2. INSTALL AIR CLEANER CASE SUB-ASSEMBLY

  1. A127151
    Install a new O-ring.

  1. A127149
    Install the air cleaner case sub-assembly with the 3 bolts.

    Torque:
    7.5 N*m{ 76 kgf*cm , 66 in.*lbf }

  1. A127148
    Connect the connector to the mass air flow meter.


3. INSTALL PURGE VSV ASSEMBLY

  1. A127147
    Install the bolt and install the purge VSV assembly.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }


4. INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

5. INSTALL AIR CLEANER CAP SUB-ASSEMBLY

  1. A127144
    Install the air cleaner cap with the grommet and 2 clamps.


6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
5.4 N*m{ 55 kgf*cm , 48 in.*lbf }

← REMOVAL (from Nov 2005)COMPONENTS (from Nov 2005) →