2005-2008 Yaris · Service Manual ENGINE

P2227 Barometric Pressure Circuit Range / Performance

Diagnostic trouble codes · Vehicles built from Nov 2005

DESCRIPTION

To detect atmospheric pressure, the built-in atmospheric pressure sensor in the ECM is used for the common rail system. According to changes in the atmospheric pressure, the ECM corrects the fuel injection volume, timing and duration, and adjusts the common rail internal fuel pressure in order to optimize engine combustion.
DTC No.
DTC Detection Conditions
Trouble Areas
P2227
Atmospheric pressure sensor malfunction
(The MIL is illuminated and a DTC is immediately set when a malfunction is detected)
  1. ECM

HINT:
DTC P2227 is set when the ignition switch is in the on (IG) position.


INSPECTION PROCEDURE


1. CHECK ANY OTHER DTCS OUTPUT (IN ADDITION TO DTC P2227)
  1. Connect an intelligent tester to the DLC3.

  1. Turn the ignition switch on (IG) and turn the tester on.

  1. Select the following menu items: Powertrain / Engine and ECT / DTC.

  1. Read DTCs.

    Result:
    Display (DTC Output)
    Proceed To
    P2227 and other DTCs
    A
    P2227
    B

    HINT:
    If any DTCs other than P2227 are output, troubleshoot those DTCs first.



B
REPLACE ECM
A

GO TO DTC CHART


← P1600 ECM BATT Malfunction (from Nov 2005)U0101 Lost Communication with TCM (+ U0129) (from Nov 2005) →