REMOVAL
Removal / installation · Vehicles built from Nov 2005
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (for C551A) |
| 2. REMOVE BATTERY (for C551) |
| 3. REMOVE BATTERY TRAY (for C551) |
| 4. REMOVE FLYWHEEL HOUSING SIDE COVER |
Disengage the claw while pushing it downward and remove the flywheel housing side cover.

| 5. REMOVE STARTER ASSEMBLY (for C551A) |
Remove the terminal cap.

Separate the harness clamp.
Remove the nut and disconnect terminal 30.
Disconnect the connector.
Remove the 2 bolts and remove the starter assembly.
| 6. REMOVE STARTER ASSEMBLY (for C551) |
Separate the harness clamp.

Remove the bolt and remove the wire harness bracket.

Remove the terminal cap.

Separate the harness clamp.
Remove the nut and disconnect terminal 30.
Disconnect the connector.
Remove the 2 bolts and remove the starter assembly.
