2005-2008 Yaris · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built from Nov 2005


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (for C551A)

2. REMOVE BATTERY (for C551)

3. REMOVE BATTERY TRAY (for C551)

4. REMOVE FLYWHEEL HOUSING SIDE COVER

  1. A117390
    Disengage the claw while pushing it downward and remove the flywheel housing side cover.


5. REMOVE STARTER ASSEMBLY (for C551A)

  1. A117392
    Remove the terminal cap.

  1. Separate the harness clamp.

  1. Remove the nut and disconnect terminal 30.

  1. Disconnect the connector.

  1. Remove the 2 bolts and remove the starter assembly.


6. REMOVE STARTER ASSEMBLY (for C551)

  1. A115442
    Separate the harness clamp.

  1. A115443
    Remove the bolt and remove the wire harness bracket.

  1. A117391
    Remove the terminal cap.

  1. Separate the harness clamp.

  1. Remove the nut and disconnect terminal 30.

  1. Disconnect the connector.

  1. Remove the 2 bolts and remove the starter assembly.

← COMPONENTS (from Nov 2005)DISASSEMBLY (from Nov 2005) →