2005-2008 Yaris · Service Manual
ENGINE
Home
›
ENGINE
› 2SZ-FE EMISSION CONTROL › HEATED OXYGEN SENSOR (for Sensor 2)
REMOVAL
Removal / installation
·
Vehicles built from Nov 2005
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE HEATED OXYGEN NO. 2 SENSOR
Disconnect the heated oxygen No. 2 sensor connector and disengage the 4 clamps.
Remove the wiring harness clamp bracket.
Using SST, remove the heated oxygen No. 2 sensor.
SST
09224-00010
← COMPONENTS (from Nov 2005)
INSPECTION (from Nov 2005) →