REMOVAL
Removal / installation · Vehicles built from Nov 2005
| 1.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
|
| 2.
REMOVE ENGINE UNDER COVER RH |
|
| 3.
REMOVE FAN AND GENERATOR V BELT
|
 |
Loosen bolts A and B.
Turn adjusting bolt C to release the tension and remove the V belt from the pulleys.
| 4.
REMOVE CAM TIMING OIL CONTROL VALVE ASSEMBLY |
 |
- Disconnect the cam timing oil control valve assembly connector.
Remove the bolt and remove the cam timing oil control valve assembly.
| 5.
REMOVE WIRE HARNESS CLAMP BRACKET (for LHD) |
 |
- Separate the 2 harness clamps.
Remove the 2 bolts and remove the 2 wire harness clamp brackets.
| 6.
REMOVE GENERATOR ASSEMBLY |
 |
- Remove the terminal cap.
Separate the connector and harness clamp.
Remove the nut and remove terminal B.
- Remove fan belt adjusting slider fixing bolts A and B and remove the fan belt adjusting bar assembly.
Remove fixing bolt C and remove the generator assembly.