REASSEMBLY
Removal / installation · Vehicles built from Nov 2005
| 1. INSTALL REAR SIDE RAIL SPACER RH |
w/ Curtain Shield Airbag:

Align a new rear side rail spacer with the markings of the roof headlining and install it onto the roof headlining.
w/o Curtain Shield Airbag:

Align a new rear side rail spacer with the markings of the roof headlining and install it onto the roof headlining.
| 2. INSTALL REAR SIDE RAIL SPACER LH |
- HINT:
- Use the same procedure as for the RH side.
| 3. INSTALL FRONT SIDE RAIL SPACER RH |
w/ Curtain Shield Airbag:

Align a new front side rail spacer with the markings of the roof headlining and install it onto the roof headlining.
w/o Curtain Shield Airbag:

Align a new front side rail spacer with the markings of the roof headlining and install it onto the roof headlining.
| 4. INSTALL FRONT SIDE RAIL SPACER LH |
- HINT:
- Use the same procedure as for the RH side.
| 5. INSTALL ANTENNA CORD SUB-ASSEMBLY |
w/ Curtain Shield Airbag:
Align the red locating tape on the antenna cord with claw A on the side rail spacer and install the cord into the claw.
Install the antenna cord into the 2 claws on the side rail spacer.
Insert the antenna cord into the cutout of the roof headlining.
Align the locating tapes on the antenna cord with the markings on the roof headlining.
Install the antenna cord onto the roof headlining with 6 new pieces of tape.


Tape size: Mark
Measurement
a
80 mm (3.15 in.)
b
20 mm (0.787 in.)
- NOTICE:
- Apply the tape securely in place.
- Do not touch the adhesive surface when applying the tape to prevent adhesion failure.
- Apply the tape securely in place.
w/o Curtain Shield Airbag:
Align the red locating tape on the antenna cord with claw A on the side rail spacer and install the cord into the claw.
Install the antenna cord into the 4 claws on the side rail spacer.
Insert the antenna cord into the cutout of the roof headlining.
Align the locating tapes on the antenna cord with the markings on the roof headlining.
Install the antenna cord onto the roof headlining with 4 new pieces of tape.


Tape size: Mark
Measurement
a
80 mm (3.15 in.)
b
20 mm (0.787 in.)
- NOTICE:
- Apply the tape securely in place.
- Do not touch the adhesive surface when applying the tape to prevent adhesion failure.
- Apply the tape securely in place.
| 6. INSTALL ROOF WIRE |
w/ Curtain Shield Airbag:

Install the part of the roof wire marked with red positioning tape into claw A of the front side rail spacer.
Align the roof wire positioning tape with the markings of the roof headlining.
Install the roof wire onto the roof headlining with 7 new pieces of tape.
Tape size: Mark
Measurement
a
80 mm (3.15 in.)
b
20 mm (0.787 in.)
- NOTICE:
- Apply the tape securely in place.
- Do not touch the adhesive surface when applying the tape to prevent adhesion failure.
- Apply the tape securely in place.
w/o Curtain Shield Airbag:

Install the part of the roof wire marked with red positioning tape into claw A of the front side rail spacer.
Install the roof wire positioning tape into the claw of the front side rail spacer.
Align the roof wire positioning tape with the markings of the roof headlining.
Install the roof wire onto the roof headlining with 6 new pieces of tape.
Tape size: Mark
Measurement
a
80 mm (3.15 in.)
b
20 mm (0.787 in.)
- NOTICE:
- Apply the tape securely in place.
- Do not touch the adhesive surface when applying the tape to prevent adhesion failure.
- Apply the tape securely in place.
