INSTALLATION
Removal / installation · Vehicles built from Jan 2006
| 1. INSTALL REAR SEATBACK ASSEMBLY |
Insert the 2 hooks into the rear seatback frame hole and install the rear seatback tightening the 2 bolts in the sequence shown in the illustration.

- Torque:
- 37 N*m{ 375 kgf*cm , 27 ft.*lbf }
Install the rear seatback cover with the 2 clips.

Pull up the rear seatback.
Install the rear seat outer belt into the rear seat shoulder belt guide.

| 2. INSTALL REAR SEAT CUSHION COVER PAD SUB-ASSEMBLY |
Pass the rear seat inner belt through the rear seat cushion slit.

Engage the 3 hooks and install the rear seat cushion cover pad.
- NOTICE:
- Make sure that the 2 rear seat cushion lock hooks and the rear seat cushion frame are securely engaged.
