DISASSEMBLY
Removal / installation · Vehicles built from Jan 2006
- CAUTION:
- Wear protective gloves. Sharp surfaces on the rear seatback frame could cause injuries to your hands.
| 1. REMOVE REAR SEAT HEADREST ASSEMBLY |
Push the lock button of the rear seat headrest support and remove the rear seat headrest.

| 2. REMOVE REAR SEAT SHOULDER BELT GUIDE |
Remove the 2 screws and the rear seat shoulder belt guide.

| 3. REMOVE REAR SEATBACK LOCK RELEASE BUTTON |
Remove the rear seatback lock release button.

| 4. REMOVE REAR SEATBACK LOCK CONTROL BEZEL (w/ Cancel Function) |
Disengage the 2 claws and remove the rear seatback lock control bezel.

| 5. REMOVE REAR SEAT HEADREST SUPPORT |
Using a clip remover, remove the 6 clips and open the rear seatback cover.

Remove the 8 hog rings.

Disengage the 2 claws and remove the rear seat headrest support.

- HINT:
- Use the same procedure for both sides.
| 6. REMOVE REAR SEATBACK STOP BUTTON GROMMET |
Disengage the 2 claws and remove the rear seatback stop button grommet.

| 7. REMOVE REAR SEATBACK FRAME SUB-ASSEMBLY |
Remove the rear seatback frame.

| 8. REMOVE REAR SEATBACK LOCK ASSEMBLY |
w/ Cancel Function:

Remove the 2 bolts and the rear seatback lock.
w/o Cancel Function:

Remove the 2 bolts and the rear seatback lock.
