2005-2008 Yaris · Service Manual HEATER & AIR CONDITIONING SYSTEM

016 Difference Evaluation 2

Diagnostic trouble codes · Vehicles built from Nov 2005

Also covers:

DESCRIPTION

DTC No.
DTC Detection Condition
Trouble Area
016
The difference in temperatures detected by the surface sensor and control overheating sensor is 30°C (86°F) or more.
  1. Surface sensor (combustion heater assembly)
  2. Control overheating sensor (combustion heater assembly)
020
Operation stop of the glow plug is detected.
(Open in the circuit)
  1. Glow plug (combustion heater assembly)
  2. Wire harness or connector (combustion heater assembly)
021
Overload on the glow plug or a short in the wire harness that is connected to the glow plug is detected.
  1. Glow plug (combustion heater assembly)
  2. Wire harness or connector (combustion heater assembly)
022
An error is detected in output from the power heater ECU to the glow plug, or a problem with the wire harness that is connected to the glow plug is detected.
  1. Power heater ECU (combustion heater assembly)
  2. Wire harness or connector (combustion heater assembly)
025
A short circuit is detected in the diagnostic communication line in the combustion heater assembly.
Combustion heater assembly
030
Air blower motor speed is out of the allowable range (8,800 rpm to 10,400 rpm). (An object may be caught in or between parts around the air blower motor.)
Air blower motor (combustion heater assembly)
031
Operation stop of the air blower motor is detected.
(Open in the circuit)
  1. Air blower motor (combustion heater assembly)
  2. Wire harness or connector (combustion heater assembly)
032
A short circuit is detected in the wire harness which is connected to the air blower motor.
Wire harness or connector (combustion heater assembly)
034
An error is detected in output from the power heater ECU to the air blower motor, or a problem with the wire harness that is connected to the air blower motor is detected.
  1. Power heater ECU (combustion heater assembly)
  2. Wire harness or connector (combustion heater assembly)
060
Operation stop of the control overheating sensor is detected.
(Open in the circuit)
Control overheating sensor (combustion heater assembly)
061
A short is detected in the control overheating sensor circuit.
  1. Control overheating sensor (combustion heater assembly)
  2. Wire harness or connector (combustion heater assembly)
064
Operation stop of the flame sensor is detected.
(Open in the circuit)
Flame sensor (combustion heater assembly)
065
A short is detected in the flame sensor circuit.
  1. Flame sensor (combustion heater assembly)
  2. Wire harness or connector (combustion heater assembly)
071
Operation stop of the surface sensor is detected.
(Open in the circuit)
Surface sensor (combustion heater assembly)
072
A short is detected in the surface sensor circuit.
  1. Surface sensor (combustion heater assembly)
  2. Wire harness or connector (combustion heater assembly)
074
The power heater ECU stops operating due to overheating.
Power heater ECU (Combustion heater assembly)
090
An internal malfunction of the control unit is detected.
Power heater ECU (combustion heater assembly)
091
Reset operation is repeated too many times.
Power heater ECU (combustion heater assembly)
092
A control unit (ROM) error is detected.
Power heater ECU (combustion heater assembly)
093
A control unit (RAM) error is detected.
Power heater ECU (combustion heater assembly)
094
A transistor malfunction due to frequent operation interruptions is detected.
Power heater ECU (combustion heater assembly)
095
A software stuck overflow is detected.
Power heater ECU (combustion heater assembly)
096
An operation lock due to the absence of valid process is detected.
Power heater ECU (combustion heater assembly)
097
An internal control unit malfunction is detected.
Power heater ECU (combustion heater assembly)
098
A main relay malfunction is detected.
Power heater ECU (combustion heater assembly)
099
An EEPROM error is detected.
Power heater ECU (combustion heater assembly)

INSPECTION PROCEDURE


1. REPLACE COMBUSTION HEATER ASSEMBLY

NEXT

END


← 015 Operating Block caused by Overheating (from Nov 2005)047 Short in Heater Fuel Pump Circuit (+ 048, 049) (from Nov 2005) →