2005-2008 Yaris · Service Manual ENGINE

REPAIR

Removal / installation · Vehicles built from Nov 2006


1. REPAIR VALVE SEATS

NOTICE:
  1. Repair the seat while checking the seating position.
  2. Keep the lip free from foreign matter.

  1. A150957
    Using a 45° cutter, resurface the valve seat so that the valve seat width is more than the specification listed below.

  1. A150958E01
    Using 30° and 75° cutters, correct the valve seat so that the valve contacts the entire circumference of the seat. The contact should be in the center of the valve seat, and the valve seat width should be maintained within the specified range around the entire circumference of the seat.

    Valve seat width:
    Item
    Specified Condition
    Intake Side
    1.0 to 1.4 mm (0.039 to 0.055 in.)
    Exhaust Side
    1.0 to 1.4 mm (0.039 to 0.055 in.)

  1. Handrub the valve and valve seat with an abrasive compound.

  1. Check the valve seating position.

← REASSEMBLY (from Nov 2006)COMPONENTS (from Nov 2006) →