INSTALLATION
Removal / installation · Vehicles built from Nov 2006
| 1.
INSTALL REAR FOG LIGHT ASSEMBLY |
 |
- Install the rear fog light bulb into the light socket.
Turn the rear fog light bulb socket and bulb, in the direction indicated by the arrow in the illustration, to install them.
- Engage the 2 claws and install the rear fog light.
- Tighten the 2 nuts.
-
Torque:
- 3.2 N*m{
33 kgf*cm
, 28 in.*lbf
}
Connect the connector.
| 2.
INSTALL REAR BUMPER SIDE SEAL
|
 |
- Engage the claw and install the rear bumper side seal with the 3 clips.