REMOVAL
Removal / installation · Vehicles built from Nov 2006
- HINT:
- Use the same procedure for both the RH and LH sides.
- The procedure described below is for the LH side.
| 1.
REMOVE REAR BUMPER SIDE SEAL
|
 |
- Using a screwdriver, remove the 3 clips and the rear bumper side seal.
| 2.
REMOVE REAR FOG LIGHT ASSEMBLY |
 |
- Disconnect the connector.
Remove the 2 nuts.
- Disengage the 2 claws and remove the rear fog light.
- Turn the rear fog light socket, in the direction indicated by the arrow in the illustration, to remove it.
Remove the rear fog light bulb from the socket.