REMOVAL
Removal / installation · Vehicles built from Nov 2006
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE NO. 2 CYLINDER HEAD COVER |
Disengage the 2 fittings shown in the illustration.

Disengage the 2 fittings shown in the illustration, then remove the No. 2 cylinder head cover.

| 3. REMOVE NO. 1 IGNITION COIL |
Disconnect the camshaft timing oil control valve connector.

Disconnect the 4 ignition coil connectors.

Remove the 4 bolts and 4 ignition coils.
