REMOVAL
Removal / installation · Vehicles built from Nov 2006
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE ENGINE UNDER COVER LH |
| 3. REMOVE ENGINE UNDER COVER RH |
| 4. REMOVE FLYWHEEL HOUSING SIDE COVER |
Disengage the claw by pulling it outward and remove the flywheel housing side cover.

| 5. REMOVE STARTER ASSEMBLY |
Remove the terminal cap.

Remove the nut and disconnect terminal 30.
Disconnect the connector.
Remove the 2 bolts and remove the starter assembly.

