2005-2008 Yaris · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built from Nov 2006


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE NO. 2 CYLINDER HEAD COVER

  1. A163755
    Disengage the 2 fittings shown in the illustration.

  1. A163756
    Disengage the 2 fittings shown in the illustration, then remove the No. 2 cylinder head cover.


3. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

  1. A158208
    Remove the bolt and the wire harness bracket (for LHD).

  1. A158209
    Disconnect the camshaft timing oil control valve assembly connector (for exhaust camshaft side).

  1. Remove the bolt and remove the camshaft timing oil control valve assembly (for exhaust camshaft side).

  1. A158211
    Remove the O-ring from the camshaft timing oil control valve assembly (for exhaust camshaft side).

  1. A158210
    Disconnect the camshaft timing oil control valve assembly connector (for intake camshaft side).

  1. Remove the bolt and remove the camshaft timing oil control valve assembly (for intake camshaft side).

  1. A158212
    Remove the O-ring from the camshaft timing oil control valve assembly (for intake camshaft side).

← ON-VEHICLE INSPECTION (from Nov 2006)INSPECTION (from Nov 2006) →