Home › RESTRAINTS › SUPPLEMENTAL RESTRAINT SYSTEM › FRONT SEAT SIDE AIRBAG ASSEMBLY

FRONT SEAT SIDE AIRBAG ASSEMBLY > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT FRONT SEAT SIDE AIRBAG ASSEMBLY (for Vehicle not Involved in Collision)


C121171
  1. Perform a diagnostic system check (Click here).

  1. With the front seat side airbag installed on the vehicle, perform a visual check. If there are any defects, such as those mentioned below, replace the front seat side airbag with a new one:

    1. Any cuts, minute cracks or marked discoloration on the front seat airbag.



2. INSPECT AND ADJUST FRONT SEAT SIDE AIRBAG ASSEMBLY (for Vehicle Involved in Collision and Airbag not Deployed)


C108104

CAUTION:
For front seat side airbag removal and installation procedures, see pages Click here and Click here, and carefully follow the correct procedure.

  1. Perform a diagnostic system check (Click here).

  1. With the front seat side airbag removed from the vehicle, perform a visual check. If there are any detects, such as those mentioned below, replace the front seat side airbag with a new one:

    1. Any cuts, minute cracks or marked discoloration on the front seat airbag.
    2. Any cracks or other damage to the wire harness or connector.