Home › ENGINE ยท 2NZ-FE › FUEL › FUEL SENDER GAUGE ASSEMBLY

FUEL SENDER GAUGE ASSEMBLY > REMOVAL

for Preparation Click here



1. REMOVE FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY
Remove the fuel suction with pump and gauge tube assembly (Click here).


2. REMOVE FUEL SENDER GAUGE ASSEMBLY


A159406

NOTICE:
Do not separate the tube indicated in the illustration.



    A105590
  1. Disconnect the fuel sender gauge connector.



    A119156
  1. Release the lock by sliding the fuel sender gauge upward, as shown in the illustration.