SIDE AIRBAG SENSOR (for Sedan) > INSTALLATION |
| 1. INSTALL SIDE AIR BAG SENSOR |
Confirm that the ignition switch is turned to off.
Confirm that the negative battery terminal is detached.
![]() |
Insert the hook into the body hole and install the airbag sensor with the bolt.
Confirm that there is no looseness by shaking the side airbag sensor.
![]() |
Connect the airbag connector.
| 2. INSTALL CENTER PILLAR LOWER GARNISH RH |
![]() |
Engage the 2 clips and 3 claws and install the center pillar lower garnish.
| 3. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH |
![]() |
Align the location mark with the paint mark first, and install the rear door opening trim weatherstrip, as shown in the illustration.
| Area | Color |
| RH side | Green |
| LH side | Red |
| 4. INSTALL REAR DOOR SCUFF PLATE RH |
![]() |
Engage the 7 claws and install the rear door scuff plate.
| 5. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH |
![]() |
Align the location mark with the paint mark first, and install the front door opening trim weatherstrip, as shown in the illustration.
| Area | Color |
| RH side | Blue |
| LH side | Pink |
| 6. INSTALL FRONT DOOR SCUFF PLATE RH |
![]() |
Engage the 11 claws and install the front door scuff plate.
| 7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 8. INSPECT SRS WARNING LIGHT |