Home › TRANSMISSION ยท CLUTCH › CLUTCH MASTER CYLINDER (for Hatchback LHD)

CLUTCH MASTER CYLINDER (for Hatchback LHD) > REMOVAL

for Preparation Click here



1. REMOVE BRAKE BOOSTER ASSEMBLY
(Click here)


2. REMOVE CLUTCH RESERVOIR TUBE
  1. Loosen the clip and remove the clutch reservoir tube from the clutch master cylinder assembly.

    HINT:
    Use a container to collect the fluid.



3. DISCONNECT CLUTCH MASTER CYLINDER TO FLEXIBLE HOSE TUBE


C115313
  1. Using a union nut wrench 10 mm, disconnect the flexible hose tube.

    HINT:
    Use a container to collect the fluid.



4. REMOVE INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY LH (w/ Instrument Panel Under Cover)


    B114572
  1. Remove the 2 screws.

  1. Disengage the 3 claws and remove the instrument panel under cover.



5. REMOVE CLUTCH MASTER CYLINDER ASSEMBLY


C115307
  1. Remove the 2 nuts and the clutch master cylinder.



6. REMOVE CLUTCH MASTER CYLINDER PUSH ROD CLEVIS


C125987E01
  1. Measure the dimension A as shown in the illustration before loosening the lock nut.

  1. Loosen the lock nut and remove the push rod clevis.

  1. Remove the lock nut.