Home › TRANSMISSION ยท CLUTCH › CLUTCH UNIT

CLUTCH UNIT > REMOVAL

for Preparation Click here



1. REMOVE MANUAL TRANSAXLE ASSEMBLY
(Click here)


2. REMOVE CLUTCH RELEASE FORK SUB-ASSEMBLY
  1. Remove the clutch release fork with the clutch release bearing from the manual transaxle.



3. REMOVE CLUTCH RELEASE FORK BOOT


4. REMOVE CLUTCH RELEASE BEARING ASSEMBLY
  1. Remove the clutch release bearing from the clutch release fork.



5. REMOVE RELEASE BEARING HUB CLIP


6. REMOVE RELEASE FORK SUPPORT
  1. Remove the release fork support from the manual transaxle.



7. REMOVE CLUTCH COVER ASSEMBLY


D025280E04
  1. Align the matchmark on the clutch cover assembly with the one on the flywheel.

  1. Loosen each set bolt one turn at a time until the spring tension is released.

  1. Remove the set bolts and pull off the clutch cover.

    NOTICE:
    Do not drop the clutch disc.



8. REMOVE CLUTCH DISC ASSEMBLY