Home › TRANSMISSION ยท C54 MANUAL TRANSAXLE › DIFFERENTIAL OIL SEAL

DIFFERENTIAL OIL SEAL > INSTALLATION

for Preparation Click here



1. INSTALL TRANSMISSION CASE OIL SEAL


C070067E01
  1. Coat the lip of a new oil seal with MP grease.

  1. Using SST and a hammer, install the new oil seal.

    SST
    09309-37010  

    Drive in depth:
    9.6 to 10.2 mm (0.378 to 0.402 in.)

    NOTICE:
    Do not damage the oil seal lip.



2. INSTALL TRANSAXLE CASE OIL SEAL


C070068E01
  1. Coat the lip of a new oil seal with MP grease.

  1. Using SST and a hammer, install the new oil seal.

    SST
    09710-26011   (09710-05061)

    Drive in depth:
    1.6 to 2.2 mm (0.063 to 0.087 in.)

    NOTICE:
    Do not damage the oil seal lip.



3. INSTALL FRONT DRIVE SHAFT ASSEMBLY LH
(Click here)


4. INSTALL FRONT DRIVE SHAFT ASSEMBLY RH

HINT:
The installation procedure for the RH side is the same as that for the LH side.