Home › STEERING › POWER STEERING › POWER STEERING ECU (for Sedan)

POWER STEERING ECU (for Sedan) > REMOVAL

for Preparation Click here


HINT:
Use the same procedure for both the RH and LH sides.



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
  1. Wait for at least 90 seconds after disconnecting the cable to prevent the airbag from working.



2. REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY
  1. Remove the upper instrument panel sub-assembly (Click here).



3. REMOVE POWER STEERING ECU


    C117191
  1. Separate the wire harness clamp.



    C117190
  1. Disconnect the 4 connectors.



    C118008
  1. Remove the 2 bolts and remove the power steering ECU.