Home › RESTRAINTS › SUPPLEMENTAL RESTRAINT SYSTEM › DRIVER SIDE KNEE AIRBAG ASSEMBLY (for Hatchback)

DRIVER SIDE KNEE AIRBAG ASSEMBLY (for Hatchback) > INSTALLATION

for Preparation Click here


CAUTION:
Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing.



1. INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY


C125678E01
  1. Engage the 6 claws.

  1. Install the driver side knee airbag assembly with the 4 bolts.

    Torque:
    10 N*m{ 102 kgf*cm , 7 ft.*lbf }

  1. Connect the airbag connector.

    NOTICE:
    Securely lock the locking button.



2. INSTALL INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY LH


    B114572
  1. Engage the 3 claws and install the instrument panel under cover.

  1. Tighten the 2 screws.



3. INSTALL STEERING COLUMN COVER


    C118007
  1. Engage the 2 claws and install the steering column cover (lower).

  1. Tighten the 3 screws.



4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
5.4 N*m{ 55 kgf*cm , 48 in.*lbf }



5. INSPECT SRS WARNING LIGHT
(Click here)