Home › BRAKE › BRAKE CONTROL › ANTI-LOCK BRAKE SYSTEM (for Hatchback)

DTC    U0073    Control Module Communication Bus OFF

for Preparation Click here


DESCRIPTION

The skid control ECU receives the signal sent from the ECM via the CAN communication system.
When DTCs indicating a CAN communication system malfunction are output, repair the CAN communication system before repairing each corresponding sensor.

DTC Code
DTC Detection Condition
Trouble Area
U0073
When either of the following is detected:
  1. With terminal IG1 10 V or more, data output from skid control ECU is completed, and output continues for 5 seconds or more.
  2. With terminal IG1 10 V or more, bus off condition occurs once or more within 0.1 seconds, and this state continues 10 times or more.
CAN communication system

INSPECTION PROCEDURE

Proceed to CAN communication system (Click here).

HINT:
When DTCs indicating a CAN communication system malfunction are output, repair the CAN communication system before repairing each corresponding sensor.