CAN COMMUNICATION SYSTEM > DIAGNOSIS SYSTEM |
| BUS CHECK (COMMUNICATION MALFUNCTION ECU) |
![]() |
Select "Bus Check" from the "System Select" screen on the intelligent tester.
![]() |
Select "Communication Malfunction DTC" from the "Bus Check" screen, and then select "Enter".
![]() |
Select the system of the DTC to be checked and select "Details".
![]() |
CAN communication system DTCs are displayed.
| BUS CHECK (COMMUNICATION BUS CHECK) |
![]() |
Select "Communication Bus Check" from the "Bus Check" screen.
![]() |
The screen displays the ECUs and sensors that are properly connected to the CAN communication system.
![]() |
| Combo Box | Display Content |
| ALL | All ECUs (sensors) connected to the CAN bus |
| V Bus | ECUs (sensors) connected to the V bus |
| Bus Name | ECUs (sensors) connected to the selected bus |
| Background Color | Connection Status |
| White | Detected normally |
| Yellow | Could not be detected in the past, but is currently detected |
| Red | Detected in the past, but cannot be detected now |
| Not displayed | Has never been detected |
| Background Color | Connection Status |
| White | Detected normally |
| Yellow | Could not be detected in the past, but is currently detected |
| Red | Detected in the past, but cannot be detected now |
| Not displayed | Has never been detected |
| Background Color | Connection Status |
| White | Detected normally |
| Yellow | Could not be detected in the past, but is currently detected |
| Red | Detected in the past, but cannot be detected now |
| Red | Has never been detected bus has connection history |
| Not displayed | Has never been detected and has no connection history |
![]() |
"There is no system connected to the communication bus" is displayed if there are no ECUs or sensors connected to the CAN bus.
| CHECK INSTALLED SYSTEMS (ECUS and SENSORS) THAT ADOPT CAN COMMUNICATION |
Systems (ECUs and sensors) that adopt CAN communication vary depending on the vehicle's optional settings. Check which systems (ECUs and sensors) are installed on the vehicle.
| ECU/Sensor Name | Check Method |
| Brake actuator (skid control ECU) | Vehicle with ABS |
| Air conditioning amplifier | With air conditioning |
| Power steering ECU | Installed on all vehicles |
| ABS and traction actuator (Skid control ECU) | Vehicle with VSC |
| ECM | Installed on all vehicles |
| Main body ECU | Installed on all vehicles |
| Combination meter ECU | Installed on all vehicles |
| Steering sensor | Vehicle with VSC |
| Yaw rate sensor | Vehicle with VSC |
| Center airbag sensor assembly | Installed on all vehicles |
| DTC TABLE BY ECU |
BRAKE ACTUATOR (SKID CONTROL ECU)
For vehicle with ABS only
| DTC No. | Detection Item |
| U0073 | Control Module Communication Bus OFF |
ABS AND TRACTION ACTUATOR (SKID CONTROL ECU)
| DTC No. | Detection Item |
| U0073 | Control Module Communication Bus OFF |
| U0100 | Lost Communication with ECM/PCM |
| U0123 | Lost Communication with Yaw Rate Sensor Module |
| U0124 | Lost Communication with Lateral Acceleration Sensor Module |
| U0126 | Lost Communication with Steering Angle Sensor Module |
POWER STEERING ECU
| DTC No. | Detection Item |
| U0100 | Lost Communication with ECM/PCM "A" |
| U0129* | Lost Communication with Brake System Control Module |
COMBINATION METER ECU
| DTC No. | Detection Item |
| U0100*1 | Lost Communication with ECM/PCM "A" |
| U0129*2 | Lost Communication with Brake System Control Module |
AIR CONDITIONING AMPLIFIER
For vehicle with air conditioning
| DTC No. | Detection Item |
| B1499/99 | Multiplex Communication Circuit |
ECM
MAIN BODY ECU
STEERING SENSOR
YAW RATE SENSOR
| DTC COMBINATION TABLE |
| DTC | Trouble Mode | |||||
| Output from | Output DTC | ECM Communication Stop Mode | Brake Actuator (Skid Control ECU) Communication Stop Mode | ABS and Traction Actuator (Skid Control ECU) Communication Stop Mode | Steering Angle Sensor Communication Stop Mode | Yaw Rate Sensor Communication Stop Mode |
| ABS and Traction Actuator (Skid Control ECU) | U0073*5 | X | X | ○*1, *2 | X | X |
| U0100*5 | ○*3 | X | ○*1, *3 | X | X | |
| U0123*5 | X | X | ○*1, *2 | X | ○*2 | |
| U0124*5 | X | X | ○*1, *2 | X | ○*2 | |
| U0126*5 | X | X | ○*1, *2 | ○*2 | X | |
| Brake Actuator (Skid Control ECU) | U0073*6 | X | ○*1, *3 | X | X | X |
| Power Steering ECU | U0100 | ○ | X | X | X | X |
| U0129*6 | X | ○ | ○ | X | X | |
| Combination Meter ECU | U0100 | ○ | X | X | X | X |
| U0129*6 | X | ○ | ○ | X | X | |
| DTC | Trouble Mode | |||||
| Output from | Output DTC | Power Steering ECU Communication Stop Mode | Center Airbag Sensor Communication Stop Mode | Air Conditioning Amplifier Communication Stop Mode | Combination Meter ECU Communication Stop Mode | Main Body ECU Communication Stop Mode |
| ABS and Traction Actuator (Skid Control ECU) | U0073*5 | X | X | X | X | X |
| U0100*5 | X | X | X | X | X | |
| U0123*5 | X | X | X | X | X | |
| U0124*5 | X | X | X | X | X | |
| U0126*5 | X | X | X | X | X | |
| Brake Actuator (Skid Control ECU) | U0073*6 | X | X | X | X | X |
| Power Steering ECU | U0100 | ○*1 | X | X | X | X |
| U0129*6 | ○*1 | X | X | X | X | |
| Combination Meter ECU | U0100 | X | X | X | ○*1 | X |
| U0129*6 | X | X | X | ○*1 | X | |
Perform troubleshooting according to the combination of DTCs output.