EXHAUST PIPE > REMOVAL |
| 1. REMOVE OXYGEN SENSOR (for Sensor 2) |
| 2. REMOVE FRONT FLOOR CENTER BRACE (w/ Side Mudguard) |
![]() |
Remove the 2 bolts and the front floor center brace from the body.
| 3. REMOVE TAIL EXHAUST PIPE ASSEMBLY |
![]() |
Remove the 2 bolts and 2 springs, and separate the tail exhaust pipe assembly from the front exhaust pipe assembly.
Remove the 2 exhaust pipe supports and the tail exhaust pipe assembly.
Remove the gasket from the front exhaust pipe assembly.
| 4. REMOVE NO. 2 EXHAUST PIPE GASKET |
Remove the No. 2 exhaust pipe gasket from the front exhaust pipe assembly.
| 5. REMOVE FRONT EXHAUST PIPE ASSEMBLY |
![]() |
Remove the 2 bolts and 2 springs, and separate the front exhaust pipe assembly from the exhaust manifold.
Remove the 3 exhaust pipe supports and the front exhaust pipe assembly
Remove the gasket from the exhaust manifold.
| 6. REMOVE EXHAUST PIPE GASKET |
Remove the exhaust pipe gasket from the exhaust manifold.
| 7. REMOVE EXHAUST TAIL PIPE BAFFLE SUB ASSEMBLY (w/ Side Mudguard) |
![]() |
Using a plastic hammer, uniformly tap out and remove the tail exhaust pipe baffle sub-assembly.
| *1 | Plastic Hammer |