Home › Audio/Visual/Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM

AUDIO AND VISUAL SYSTEM > Cellular Phone cannot Send/Receive

for Preparation Click here


INSPECTION PROCEDURE

1.CHECK "Bluetooth" SETTINGS
  1. Check if the "Bluetooth" settings are correct.

    OK:
    "Bluetooth" settings are correct.



NG
SET SETTINGS CORRECTLY
OK


2.CHECK CELLULAR PHONE
  1. Check if the cellular phone is "Bluetooth" compatible.

    HINT:
    Some versions of "Bluetooth" compatible cellular phones may not function.

    OK:
    The phone is "Bluetooth" compatible.



NG
END (ONLY A "Bluetooth" COMPATIBLE CELLULAR PHONE CAN BE USED)
OK


3.CHECK SETTINGS
  1. Check the cellular phone functions.

    HINT:
    The cellular phone is unable to call when any of the following conditions are met:
    1. The cellular phone is locked.
    2. The directory is being transferred.
    3. The line is crossed.
    4. Outside service range.
    5. The power is off.
    6. The cellular phone is not connected to "Bluetooth" ("BT" is displayed while connected).

    OK:
    None of the above conditions exist.



NG
SET CORRECTLY
OK


4.CHECK CELLULAR PHONE
  1. Check if the cellular phone can make a call.

    HINT:
    When the battery is low, calls cannot be made or received.

    OK:
    Cellular phone can make a call.



NG
REPAIR OR REPLACE CELLULAR PHONE
OK


5.CHECK RECEPTION
  1. Place the cellular phone close to the radio receiver assembly.

  1. Set the cellular phone so that it can receive calls.

  1. Check if the cellular phone has reception according to the radio receiver assembly.

    OK:
    The cellular phone has reception.



NG
REPLACE RADIO RECEIVER ASSEMBLY (Click here)
OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)