Home › Steering › STEERING GEAR / LINKAGE › STEERING GEAR

STEERING GEAR > REMOVAL

for Preparation Click here



1. POSITION FRONT WHEELS FACING STRAIGHT AHEAD


2. REMOVE FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY
(Click here)


3. REMOVE NO. 1 STEERING COLUMN HOLE COVER SUB-ASSEMBLY


C234909
  1. Remove the No. 1 steering column hole cover sub-assembly from the manual steering gear.



4. REMOVE MANUAL STEERING GEAR


    C234910
  1. Remove the 2 bolts, 2 nuts and the manual steering gear from the front suspension crossmember.

    NOTICE:
    Keep the nut from rotating while turning the bolt.