Home › Drivetrain ยท U441E AUTOMATIC TRANSMISSION / TRANSAXLE › TRANSMISSION WIRE

TRANSMISSION WIRE > INSTALLATION

for Preparation Click here



1. INSTALL TRANSMISSION WIRE
  1. Coat a new O-ring with Toyota Genuine ATF Type T-IV and install it to the transmission wire.



    C203903
  1. Pass the transmission wire through the transaxle case.

  1. Install the transmission wire with the bolt.

    Torque:
    5.4 N*m{ 55 kgf*cm , 48 in.*lbf }



2. INSTALL TRANSMISSION VALVE BODY ASSEMBLY
(Click here)