CLUTCH PEDAL SWITCH > REMOVAL |
| 1. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY |
![]() |
Remove the 2 <A> screws.
Disengage the claw and the guide and remove the instrument panel under cover.
| 2. REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL (for LHD) |
![]() |
Disengage the 5 clips and the 2 claws and remove the instrument panel finish panel.
| 3. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL (w/o Knee Airbag) |
for LHD:
![]() |
Disengage the 2 clips and the 5 claws and remove the instrument panel finish panel.
for RHD:
![]() |
Disengage the 2 clips and the 6 claws and remove the instrument panel finish panel.
| 4. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (w/ Knee Airbag) |
| 5. REMOVE CLUTCH START SWITCH ASSEMBLY |
Disconnect the clutch start switch connector.
![]() |
Remove the nut and the clutch start switch assembly from the clutch pedal support sub-assembly.
| *A | for LHD |
| *B | for RHD |
| 6. REMOVE NO. 2 CLUTCH START SWITCH ASSEMBLY |
Disconnect the No. 2 clutch start switch connector.
![]() |
Remove the nut and the No. 2 clutch start switch assembly from the clutch pedal support sub-assembly.