DTC B1625/22 Side Airbag Sensor LH Circuit Malfunction |
DTC B1627/82 Lost communication with Side Airbag Sensor LH |
| DTC No. | DTC Detection Condition | Trouble Area |
| B1625/22 B1627/82 |
|
|

| 1.CHECK SIDE AIRBAG SENSOR ASSEMBLY LH |
Turn the ignition switch off.
Disconnect the cable from the negative (-) battery terminal.
![]() |
Interchange the side airbag sensor assembly LH with the side airbag sensor assembly RH and connect the connectors to them.
| *1 | Side Airbag Sensor Assembly RH |
| *2 | Airbag Sensor Assembly |
Connect the negative (-) terminal cable to the battery, and wait for at least 2 seconds.
Turn the ignition switch to ON, and wait for at least 60 seconds.
Clear the DTCs stored in the memory (Click here).
Turn the ignition switch off.
Turn the ignition switch to ON, and wait for at least 60 seconds.
Check for DTCs (Click here).
| Result | Proceed to |
| DTC B1620/21, B1622/81, B1625/22 or B1627/82 is not output. | A |
| DTC B1625/22 or B1627/82 is output. | B |
| DTC B1620/21 or B1622/81 is output. | C |
Turn the ignition switch off.
Disconnect the cable from the negative (-) battery terminal.
Return the side airbag sensor assembly RH and the side airbag sensor assembly LH to their original positions and connect the connectors to them.
|
| ||||
|
| ||||
| A | ||
| ||