FRONT SEAT OUTER BELT ASSEMBLY (for 5 Door) > REMOVAL |
| 1. PRECAUTION |
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 3. REMOVE FRONT DOOR SCUFF PLATE |
![]() |
Disengage the 8 claws and remove the front door scuff plate.
| 4. REMOVE REAR DOOR SCUFF PLATE |
![]() |
Disengage the 5 claws and guide and remove the rear door scuff plate.
| 5. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP |
![]() |
Remove the front door opening trim weatherstrip.
| 6. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP |
![]() |
Remove the rear door opening trim weatherstrip.
| 7. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY |
![]() |
Disengage the 3 claws and remove the lap belt outer anchor cover.
![]() |
Remove the bolt and disconnect the floor anchor part of the front seat outer belt assembly.
| 8. REMOVE CENTER PILLAR LOWER GARNISH |
![]() |
Disengage the 2 clips and the 2 claws.
Disengage the 2 guides and remove the center pillar lower garnish.
| 9. REMOVE CENTER PILLAR UPPER GARNISH |
![]() |
Remove the 2 screws and disengage the clip.
Pass the front seat outer belt through the slit in the center pillar upper garnish and remove the center pillar upper garnish.
| 10. REMOVE FRONT SEAT OUTER BELT ASSEMBLY |
![]() |
Remove the bolt and the shoulder anchor part of the front seat outer belt assembly.
![]() |
Using a screwdriver with its tip wrapped in protective tape, release the locking button.
| *1 | Protective Tape |
| *2 | Locking Button |
Disconnect the pretensioner connector.
![]() |
Remove the 2 bolts.
Disengage the 2 hooks and remove the front seat outer belt assembly.