AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System) > Back-up Power Source Circuit |

| 1.CHECK HARNESS AND CONNECTOR (AIR CONDITIONING AMPLIFIER ASSEMBLY - BATTERY) |
![]() |
Disconnect the F42 air conditioning amplifier assembly connector.
Measure the voltage according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
| F42-21 (B) - Body ground | Always | 11 to 14 V |
| *a | Front view of wire harness connector (to Air Conditioning Amplifier Assembly) |
|
| ||||
| OK | ||
| ||