BACK DOOR OUTSIDE GARNISH (w/o Power Door Lock) > REMOVAL |
| 1. REMOVE BACK DOOR TRIM BOARD |
![]() |
Disengage the 11 clips and remove the back door trim board.
| 2. REMOVE REAR WIPER MOTOR ASSEMBLY (w/ Rear Wiper) |
| 3. REMOVE BACK DOOR LOCK CONTROL ASSEMBLY |
![]() |
Disconnect the back door outside handle cable.
![]() |
Remove the 2 nuts and the back door lock control.
| 4. REMOVE BACK DOOR LOCK CYLINDER ASSEMBLY |
![]() |
Disconnect the back door lock control rod.
![]() |
Remove the 2 nuts and the back door lock cylinder.
| 5. REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY |
![]() |
Remove the nut.
![]() |
Disengage the 2 clips and remove the back door outside garnish.
| 6. REMOVE BACK DOOR OUTSIDE HANDLE SUB-ASSEMBLY |
![]() |
Remove the back door outside handle.