Home › Brake › PARKING BRAKE › PARKING BRAKE LEVER

PARKING BRAKE LEVER > INSTALLATION

for Preparation Click here



1. INSTALL PARKING BRAKE SWITCH ASSEMBLY
  1. Install the parking brake switch assembly with the screw.



2. INSTALL PARKING BRAKE LEVER SUB-ASSEMBLY
  1. Install the parking brake lever sub-assembly with the 2 bolts.

    Torque:
    13 N*m{ 127 kgf*cm , 9 ft.*lbf }

  1. Connect the parking brake switch connector.

  1. Install the parking brake equalizer with a new lock nut.



3. ADJUST PARKING BRAKE LEVER TRAVEL
(Click here)


4. INSTALL REAR CONSOLE BOX ASSEMBLY
(Click here)