Home › Vehicle Exterior › DOOR / HATCH › BACK DOOR OPENER SWITCH

BACK DOOR OPENER SWITCH > REMOVAL

for Preparation Click here



1. REMOVE BACK DOOR TRIM BOARD


    B271631
  1. Disengage the 11 clips and remove the back door trim board.



2. REMOVE REAR WIPER MOTOR ASSEMBLY
(Click here)


3. REMOVE BACK DOOR LOCK CYLINDER ASSEMBLY (w/ Lock Cylinder)


    E228987
  1. Disconnect the connector.

  1. Remove the 2 nuts and back door lock cylinder.



    E228988
  1. Disengage the 2 claws and remove the door unlock switch.



4. REMOVE BACK DOOR GARNISH NO. 2 RETAINER (w/ Cover)


    B284625
  1. Remove the 2 nuts and back door garnish No. 2 retainer.



5. REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY
  1. Disconnect the connectors.



    B283046
  1. Remove the 3 nuts.



    B283015
  1. Disengage the 2 clips and remove the back door outside garnish.



6. REMOVE BACK DOOR OPENER SWITCH ASSEMBLY


    B271654
  1. Remove the back door opener switch.