Home › Vehicle Exterior › WINDOW / GLASS › WINDOW DEFOGGER SYSTEM

WINDOW DEFOGGER SYSTEM > HOW TO PROCEED WITH TROUBLESHOOTING

for Preparation Click here


HINT:
  1. Use these procedures to troubleshoot the window defogger system.
  2. *: Use the intelligent tester.



1.VEHICLE BROUGHT TO WORKSHOP

    NEXT


    2.INSPECT BATTERY VOLTAGE

      Standard voltage:
      11 to 14 V

      If the voltage is below 11 V, recharge or replace the battery before proceeding.

    NEXT


    3.SYSTEM CHECK
    1. Check the vehicle specifications.
      Result 
      Result
      Proceed to
      for Automatic Air Conditioning System
      A
      for Manual Air Conditioning System
      B



    B.
    Go to step 5
    A


    4.CHECK LIN COMMUNICATION SYSTEM
    1. Check if the LIN communication system is functioning normally.
      Result 
      Result
      Proceed to
      LIN communication system is normal
      A
      LIN communication system is not normal
      B



    B.
    GO TO LIN COMMUNICATION SYSTEM (Click here)
    A


    5.PROBLEM SYMPTOMS TABLE
    1. Refer to Problem Symptoms Table (Click here).
      Result 
      Result
      Proceed to
      Fault is not listed in Problem Symptoms Table
      A
      Fault is listed in Problem Symptoms Table
      B



    B.
    Go to step 7
    A


    6.OVERALL ANALYSIS AND TROUBLESHOOTING*
    1. Terminals of ECU (Click here).

    2. Data List/Active Test*1 (Click here).

      1. *1: for Automatic Air Conditioning System


    NEXT


    7.REPAIR OR REPLACE

      NEXT


      8.CONFIRMATION TEST

        NEXT

        END