Home › Drivetrain ยท U441E AUTOMATIC TRANSMISSION / TRANSAXLE › DIFFERENTIAL OIL SEAL

DIFFERENTIAL OIL SEAL > REPLACEMENT

for Preparation Click here



1. REMOVE FRONT DRIVE SHAFT ASSEMBLY
(Click here)


2. REMOVE NO. 2 TRANSAXLE CASE OIL SEAL


    C203931E01
  1. Using SST, remove the No. 2 transaxle case oil seal.

    SST
    09308-00010  



3. REMOVE TRANSAXLE CASE OIL SEAL


    C203933E01
  1. Using SST, remove the transaxle case oil seal.

    SST
    09308-00010  



4. INSTALL NO. 2 TRANSAXLE CASE OIL SEAL


C203932E01
  1. Coat the lip of a new No. 2 transaxle case oil seal with MP grease.

  1. Using SST and a hammer, install the No. 2 transaxle case oil seal.

    SST
    09517-12010  
    09630-24014   (09620-24051)

    Drive in depth:
    2.6 to 3.6 mm (0.103 to 0.141 in.)

    NOTICE:
    Do not damage the oil seal lip.



5. INSTALL TRANSAXLE CASE OIL SEAL


C203934E01
  1. Coat the lip of a new transaxle case oil seal with MP grease.

  1. Using SST and a hammer, install the transaxle case oil seal.

    SST
    09316-60011   (09316-00011)

    Drive in depth:
    2.6 to 3.6 mm (0.103 to 0.141 in.)

    NOTICE:
    Do not damage the oil seal lip.



6. INSTALL FRONT DRIVE SHAFT ASSEMBLY
(Click here)