NOISE FILTER > INSTALLATION |
| 1. INSTALL RADIO SETTING CONDENSER |
![]() |
Engage the claw to install a new terminal cover to the wire harness.
![]() |
Engage the 3 claws to install the new terminal cover with the wire harness to a new condenser.
Engage the clamp to temporarily install a new condenser with the wire harness to the body.
Install the new condenser with the bolt.
| 2. INSTALL DOOR CONTROL RECEIVER (for 5 Door) |
| 3. INSTALL DOOR CONTROL RECEIVER (for 3 Door) |