DIAGNOSIS AND TESTING
CONTROL SWITCH
The following test will determine if the sunroof control switch is operating properly.
1. Remove the overhead console from the headliner (Refer to 8 - ELECTRICAL/OVERHEAD CONSOLE - REMOVAL).
2. Remove the sunroof control switch from the overhead console (Refer to 23 - BODY/SUNROOF/CONTROL SWITCH - REMOVAL).
3. Using an ohmmeter, test the switch terminals for proper continuity using the table below. If any of the terminals do not show proper continuity, replace the sunroof control switch.
| SWITCH POSITION (DEPRESSED) | CONTINUITY BETWEEN TERMINALS |
| VENT (V) | 3, 4 |
| OPEN (AUTO) | 1, 4 |
| CLOSE (AUTO) | 2, 4 |