REMOVAL
FRONT
1. From the underside of the hood, disengage the rear edge of the silencer pad from the tabs that secure it to the inner hood reinforcement (1) as necessary to access the front washer nozzle hose connections (2).
2. Disconnect the hose connection from the barbed nipple of the front washer nozzle.
3. From the underside of the hood, release the integral latches of the front washer nozzle (2) and push the nozzle out through the mounting hole toward the top side of the hood (1).
4. Remove the nozzle from the top of the hood panel.
REAR
1. Disconnect and isolate the battery negative cable.
2. Remove the fasteners that secure the spoiler (3) to the liftgate outer panel (1). (Refer to 23 - BODY/EXTERIOR/LIFTGATE SPOILER - REMOVAL).
3. Pull the spoiler away from the liftgate far enough to access and disconnect the liftgate washer supply hose (2) from the barbed nipple on the back of the rear washer nozzle (4).
4. From the back of the spoiler, depress the two integral latch features of the nozzle, while pulling the nozzle out through the face of the spoiler.