B2331-VEHICLE NEEDS DEGAUSSED
For a complete wiring diagram Refer to Section 8W.
- When Monitored:
Vehicle speed greater than 10 mph.
- Set Condition:
The magnetic feild around the vehicle is greater than 2.4 guass.
Diagnostic Test
1. PERFORM THE VEHICLE DEMAGNITIZING PROCEDURENOTE: A blank compass display indicates that vehicle degaussing is required.
NOTE: After demagnitizing, the vehicle will enter Auto Fast-Cal when the ignition is turned on.
NOTE: Ensure that the correct compass variance is stored in the compass memory. See “Setting Compass Variance” in the Service Information.
View repair.
Repair
- Refer to the Service Information and perform the Compass Demagnitizing Standard Procedure.
- (Refer to 8 - ELECTRICAL/OVERHEAD CONSOLE/ELECTRONIC VEHICLE INFO CENTER - STANDARD PROCEDURE)