LIFTERS-HYDRAULIC
DESCRIPTION
Valve lash is controlled by hydraulic tappets located inside the cylinder head (9), in tappet bores below the camshafts.
REMOVAL
1. (Refer to 9 - ENGINE/CYLINDER HEAD/ROCKER ARM / ADJUSTER ASSY - REMOVAL).
INSPECTION
Clean each lifter assembly in cleaning solvent to remove all varnish and sludge deposits. Inspect for indications of scuffing on the side and base of each lifter body.
INSTALLATION
1. (Refer to 9 - ENGINE/CYLINDER HEAD/ROCKER ARM / ADJUSTER ASSY - INSTALLATION).