RIGHT ENGINE MOUNT
REMOVAL
1. Disconnect the negative battery cable. (Refer to 8 - ELECTRICAL/BATTERY SYSTEM/CABLES - REMOVAL)
2. Loosen the upper engine mount fastener at the engine mount bracket
3. Raise and support the vehicle.
4. Loosen the lower engine mount fastener.
5. Install the engine support and support the engine.
6. Remove the engine mount bolts and engine mount.
INSTALLATION
1. Position the engine mount and install the engine mount bolts. Tighten bolts to 54 N·m (40 lbs. ft.).
2. Lower the engine and remove the engine support.
3. Tighten the engine mount through bolts to 54 N·m (40 lbs. ft.)
4. Lower the vehicle.
5. Connect the negative battery cable. (Refer to 8 - ELECTRICAL/BATTERY SYSTEM/CABLES - INSTALLATION)