A-PILLAR TRIM
REMOVAL
1. Remove the sun visor (4), (Refer to 23 - BODY/INTERIOR/SUN VISOR - REMOVAL).
2. Remove the push pin fastener (6).
3. Using a trim stick C-4755 or equivalent, separate the retaining clips (3) and remove the upper A-pillar trim (2).
4. Using a trim stick C-4755 or equivalent, separate the retaining clips (5) and remove the lower A-pillar trim (4).
INSTALLATION
1. Position the lower A-pillar trim (4) onto the A-pillar and seat the clips (5) fully.
2. Position the upper A-pillar trim (2) onto the A-pillar and seat the clips (3) fully.
3. Install the push pin fastener (6).
4. Install the visor (4), (Refer to 23 - BODY/INTERIOR/SUN VISOR - INSTALLATION).